Compact power units are based on the HY10 body, featuring valve mounting cavities according to the SAE 8 standard, i.e. ¾”-16 UNF, while the connection ports are threaded Ø1/4” BSP.
On request, Ø3/8 threads and SAE/NPT versions are available.
Standard Group 1 unidirectional gear pumps can be used, with displacements from 1 cc/rev up to 9.8 cc/rev, and a maximum operating pressure of 250 bar.
Documentation
On request, emergency manual pumps, modules with float control for snowplough blades, and pilot-operated check valves can be integrated.
Our tank range includes two plastic versions with capacities of 10 L or 20 L, complete with dedicated cover and mounting support.
DC brushed motors are available in 12V and 24V versions, with power ratings from 1.6 kW to 3 kW, suitable for intermittent and continuous duty.
| Type | Displacement cm³/rev. |
P2 Int. working pressure to bar |
Tanks litres* |
|---|---|---|---|
| HY10 | 1 – 9.8 | 250 | 10 or 20 |
| Motor powers D.C. - 12V* kW |
Motor powers D.C. - 24V* kW |
|---|---|
| 1.6 - 2.5 | 2.2 - 3 |
| POSITION | DESCRIPTION | POSITION | DESCRIPTION | |||
|---|---|---|---|---|---|---|
| 1 | Suction filter | 9 | HY 10 Body | |||
| 2 | Cetop 3 solenoid valve | 10 | Pressure maximum valve | |||
| 3 | Cetop 3 base | 11 | Electric motor | |||
| 4 | 90° rotation module | 12 | Check valve | |||
| 5 | Base cetop 3 | 13 | Valve cavity closure | |||
| 6 | Gear pump | 14 | Motor-pump coupling | |||
| 7 | Plastic tank support | 15 | Thermoplastic cover | |||
| 8 | Tak cap Ø ¾" | 16 | Thermoplastic tank |